NANO Thermal Plasma

Plasma Heaters Nano

Here you'll find a list of products from category: Plasma Heaters Nano. Please filter the products selecting the desired options from "Filters" section.

The heating system used in NANO Thermal Plasma is a combination of the heat generator which is an exclusive application of nano technology and glass-friendly.

Moreover, the characteristics and the wavelength of sunlight and NANO Thermal Plasma are the same. In other words, the heating cycle of the Sun is modelled in the laboratory conditions and adapted from fan of plasma.

The heating system with NANO Thermal Plasma is extremely performant, highlighting the quality and efficiency. The active element underlying Nano Thermal Plasmas is produced in Germany and their manufacturing is done in Turkey. We can say that eventually results in a high quality product tested and verified for years on the Western European market.

 

Dual heat-generating NANO Plasma Thermal AG+

The infrared NANO Thermal Plasma  has no visible heating elements. The heat generator element is Silver applied in a double circuit on the inner surface of the glass. There is no other kind of endurance. The passage of current through a network of silver ions is generating negative ions causing ionization of the air in the room and the effect of nanosilver. Thanks to NANO technology, heat is generated inside the device without any loss and electric current is transformed into heat with a 99.9% efficiency.

 

Heat-generating Neo C++

Neo C++ is a unique application of a blended thin carbon plate applied to glass heaters NANO Thermal Plasma and used when limiting temperature at the surface is necessary. It is healthy, and extremely well designed for human comfort.

Bath of Isotherm Heath

Compared to other electric devices, NANO Thermal Plasmas radiate the heat evenly in the near environment. The heat is generated in large interior surfaces of glass and radiant Panel and is radiated at an angle of 180 degrees, providing an equal distribution of heat without loss. By the way, as long as the heat is directed not like the infrared radiant panels not only the objects in the face (to limited areas) but also the objects around the Thermal Plasma NANO are heated. It creates a uniform and homogeneous heating system called “isotherm heat bath ".

Intelligent heating

NANO Thermal Plasmas with infrared radiation heat consume less energy while working long periods in which they keep a constant temperature on the surface of the glass plate heater

 

VISIO RANGE

The most commercial NANO Thermal Plasma are the ones in the classical form of plasma screens, called Innova. They are presented under the three diagonals of 82, 94 and 106 cm, maximum power 1800 W, 2000 W, 2400 W, 3000 W.

Name

Setting 1

Setting 2

Setting 3

Setting 4

Innova 1800

490 W

900 W

914 W

970 W

Innova 2000

620 W

950 W

1020 W

1150 W

Innova 2400

620 W

950 W

1020 W

1150 W

Innova 3000

830 W

1170 W

1670 W

1900 W

Lompro Horizontal

730 W

1150 W

1420 W

1780 W

Bofa Vertical

730 W

1150 W

1420 W

1780 W

 

DEKORA RANGE

For an elegant bathroom we are offering the heatable mirror Bagnallo and the Towel dryer Tovago or Nuovo Tovago, the latter being from the new generation of NANO Thermal frameless Plasma.

Name

Setting 1

Setting 2

Setting 3

Setting 4

Mirror Bognallo 200 W

-----

-----

-----

200

Tovago – Towel dryer

180 W

260 W

320 W

380 W

Mirror Nuovo Tovago

180 W

260 W

320 W

380 W

Nuovo Tovago White

180 W

260 W

320 W

380 W

 

PIEDO RANGE

Piedo Range is presented with Plasma Resto that is portable and can be put on the ground anywhere you wish in a room. It has a protective grille which can be black or silver.

Name

Setting 1

Setting 2

Setting 3

Setting 4

Resto 2400 W

620 W

950 W

1020 W

1150 W

 

Power consumption of Thermal Plasma (1 KWh = 1000 W)

THERMAL PLASMA SIZING

Uses at least one device for each room that is intended to be heated.

For surfaces larger than 30 square meters it is recommended to use multiple devices with proportional heating surface.

The size of NANO Infrared Thermal Plasmas is calculated taking into account the thermal needs of the room depending on height, surface: the degree of isolation glass surface (glass), the number of exterior walls, its use (permanent or casual).

Poor thermal insulation: polystyrene, without regular wood (without glass).

Average thermal insulation: polystyrene is 5 cm, double-glazed Windows.

Good thermal insulation: polystyrene of 10 cm minimum, double-glazed windows of very good quality.

An apartment located on the ground floor or on the top floor of a block without thermal rehabilitation is considered as having a poor insulation.

An apartment located on the first floor of a block without intermediate thermal rehabilitation is considered to be a weak to medium insulation.

An apartment located in a building with thermal rehabilitation is considered as a good insulation.

A room situated in a brick house with thick walls 30 to 40 cm, but no polystyrene and glass surface is considered as having a weak to medium thermal insulation.

A room situated in a brick house with polystyrene and glass surface is considered as having low thermal insulation to medium.

A room situated in a brick house with large glass surface and polystyrene is considered as having average thermal insulation.

Also if the rooms around the room in which the appliance can be mounted are not heated, or if the apartment is situated on the ground floor or floor heating demand grows and we recommend the use of a more powerful machine.

            

Thernal Insulation
<10 sqm
10-15 sqm
15-20 sqm
20-25 sqm
Weak
Innova S
Innova M
Innova XL
Innova S + Innova M
Medium
Innova S
Innova M
Innova M
Innova XL
Ask a question / Write a review (comment)


* Required fields