radiant panels, infrared radiant panels, price radiant panels, cheep heating

Radiant Panels - Respo Black 2400 W - electronic control

Product code
1050
filtrul2BBB : 2000 - 2500 W
:
Price starting from : 600-700 euro

Product name: Respo Black Thermal Plasma 2400 W;
Model: Electronic;
Remote Controller: Yes;
Speed heating: 4;
Heated area: 20-25 sqm;
Heated surfaces are indicative and are calculated for a height of 2.5 m maximum room and a very good thermal insulation.
Radiation temperature: 80-120 degrees Celsius;
Panel size: 550*800*40 mm;     

Diagonal: 37" (94 cm);
Weight: 14 kg;
Color: black;
Mounting: on the ground, wherever you want in the room;
Power cable included: YES, length 2 m;
Power supply: 220V-240V;
Long-wave infrared: 4 to 14 microns;
Maximum power: 2400 W;
Average consumption: 

  • Heating Stage 1 - 0.62 Kwh/hour;
  • Heating Stage 2 - 0.95 Kwh/hour;
  • Heating Stage 3 - 1.02 Kwh/hour;
  • Heating Stage 4 - 1.15 Kwh/hour.

The number of hours of operation may vary between 2-3 hours for apartments and 4-5 hours (24 hours) and depends on the degree of insulation of the room, the desired temperature in the room, outside temperature, etc.
To calculate the exact heat requirements taking into account the following elements for each room separately:

 • length\/width\/height (surface/volume);
• degree of isolation (determined according to the building materials and insulating material used);
• number of exterior walls of the room;
• the surface of the window\/doors on each outer wall and their quality;
• If it is a house or an apartment block;
• in the case of block apartments, is situated the apartment (ground floor, between floors or floor) and if the surrounding apartments are heated;
• the degree of insulation of the floor\/ceiling (if applicable);
• If it is heated the whole House or just some rooms;
• If it is permanent or occasional use of homes.


Ask our specialists a calculation of heat required for each room separately!
NANO Thermal Plasmas
with mechanical control with only one button (switch) ON/OFF and have a single step heating (equivalent to the maximum power level from those with electronic controls).
NANO Thermal Plasma is recommended to attach a ambient thermostat for regulating and maintaining the temperature in the room. In this case, the thermostat will interrupt the supply of electricity at fixed temperature. When the room temperature decreases in Thermal Plasma, NANO will restart in order to maintain the room temperature is equal to the temperature currently set (desired).
Ambient thermostat: OPTIONAL.
We put at your disposal the thermostat Socket 16 of the type: Thermostats-Thermostat-Socket-16-A-1031p.html

Ask a question / Write a review (comment)


* Required fields